Void Resonator 4x Excavating Channel Automated Layout

Useful links:

Sixty Four Guides

Void Resonator 4x Excavating Channel Automated Layout is a base build layout to mine Cubes for Stones.
It requires 4x Void Resonators, 4x Excavating Channel, and 4-6 Industrial Silos.

No more clicking. This Layout can be used manually or fully automated.

Utilizing 4x Excavating Channel and 4x Void Resonator will allow most cost efficient setup at that stage of the game, when you dont have that much Void and Hollow Stone

Main Purpose of the Layout

The main purpose of the Void Resonator 4x Excavating Channel Automated Layout is creating a new mining layout using Excavating Channel but without use of Hell Gem Destabilizer and Hell Gem Injector. That allows for higher amount of cubes being crushed by Void Resonator and possible speed scaling for extra productivity with high Chromalit production.

Early on this build can be an additional setup with the basic Scalable Square Excavating Channel Layout as a main resource source, because it needs decent Hell Gem Annihilation ticks in order to keep up the speed.

Once you will have about 40-50k Chromalit in the storage with the Chromalit Decay in process this layout should outperform your previous layouts.

Void Resonator 4x Excavating Channel Automated Layout Plan

Its possible start with Entropy Resonator II instead of Void Resonator, but it will be extremely slow and inefficient.

All Resonator spots are independent of each other so can be upgraded gradually, 1 by 1.

Most of the time the main issue will be Excavating Channel costs, especially if you left your old setup intact. You can dismantle old layout slowly to gradually move into the new one, that way you wont get low on Celestial Foam production and get some Hell Gem in the process.

Void Resonator 4x Excavating Channel Automated Layout Isnt scalable and putting another layer of the same type nearby wont get any significant benefit, other than saving on Industrial Silo and maybe some Conductors.

Void Resonator 4x Excavating Channel Automated Layout can be run manually by loading Industrial Silos or can be fully automated by connecting them to the Conductor. Although it will take a lot of Conductor to connect all the silos and it can get pretty pricey fast.

Video Guide

Video Guide using the Void Resonator 4x Excavating Channel Automated Layout Build explaining how it works, which machines to use, when and how you can build it and upgrade it.

Additional Information

Void Resonator 4x Excavating Channel Automated Layout can be very slow at start and might seem inefficient. It have several risks that should be taken into account when adopting it:

• Low amount of Chromalit production might drastically slow down the setup
• Increasing the Chromalit production rates through Celestial Irradiators might drain your Celestial Foam storage slowing down the production rate
• High amount of Excavating Channel and Void Resonator and their cost scaling makes layout hard to scale

Its recommended to leave at least 1 Excavating Channel from the previous layout to make sure that you will have a good resources flow until Void Resonator 4x Excavating Channel Automated Layout will get to its speed.

This build can be used all the way to the endgame, making it a great pick to keep the resources flowing.

Suggested by @stankosh

×